2006 Chrysler Town and Country Tire Pressure Light Reset
The following guide will show you how to reset the tire pressure warning light on the 2006 Chrysler Town and Country.
To reset the TMPS (tire pressure monitoring system) light in the Chrysler Town and Country you must first inflate all four tires to the required level.
You can find the required tire pressure for your exact model, year and trim using our sister site: Chrysler Town and Country Tire Pressure.
Once you have inflated the tires, you need to turn the car off and let it sit for a minimum of 20 minutes.
Then turn on your Town and Country and drive it for more than 10 minutes at more than 15mph – basic freeway driving is ideal for this.
This will give the TMPS the chance to relearn the sensor IDs and the warning light should reset on your dashboard.
2006 Chrysler Town and Country
![Chrysler Town and Country Image](https://resetlight.com/wp-content/uploads/2019/07/chrysler-town-and-country-trans-300x189.jpg)
This tire pressure reset guide is relevant for the 2006 Chrysler Town and Country.